Armoloy has been available in the UK for more than 25 years now and, in that time, has successfully tackled thousands of applications that impact, either directly or indirectly, with the valve industry.
We have tackled all aspects of the industry from miles up in the stratosphere to applications that are miles down in the ocean depths for the Oil & Gas industry.
The beneficial properties of Armoloy include its hardness in combination with its corrosion resistance in combination with its natural slipperiness. This gives it great resistance to abrasive wear and galling.
One more thing - it doesn't come off in service. Armoloy will not chip, crack or peel under normal operating conditions.
Over the years, the Oil & Gas, Power, Petrochemical and Valve specifiers have turned to ever more exotic metals and alloys. They are now able to offer certain invaluable properties in their performance. However, against this increasingly narrow range of brilliance must be offset the fact that the majority of them suffer from wear problems and have a natural talent for picking up or "stickability".
As a result of the properties described above, a thin coating ( 5 microns ) of Armoloy NTDC (Nodular Thin Dense Chrome ) will either eliminate these problems or make them manageable. This will provide a workable solution on sliding, reciprocating, rotating or threaded surfaces over a wide range of temperatures ( - 240° to + 850°C ). This thin coating is unlikely to affect most manufacturing tolerances and, in many instances, can be allowed for thus eliminating any further machining and jumping straight to the assembly operation.
Masking, where specified, can be achieved although the very thinness of the coating renders it unnecessary in many applications and the area can be described as "optional" in working drawings. One benefit that is attainable from uncoated masked off areas is the potential for different coatings on different areas of the component. This is equally applicable to internal as well as external surfaces - long bores and internal threads are not a problem for Armoloy provided that access is available. Line of sight is also not essential.
Housings / Bodies Clamping Rings Sealing Rings Bearings
Thrust Rings Vanes / Discs Vane Centralisers Seating Rings
Cast Iron All Steels All Stainless Steels inc. Duplex & Nitronics
Inconels Nimonics Ampco ( Be/Cu ) CuproNickel Monel
Brass Bronze Aluminium Bronze Manganese Bronze Hastelloy